Guardian Halo+ Get the app

Stay connected to the back seat while you drive

Guardian Halo+ works with Apple CarPlay® and Android Auto™. Check how your car connects to your phone, then follow the setup.

How does your car connect to your phone?

Find the picture that matches your car, then tap it for the steps.

Once you’re connected

  • Alerts on the car screen. With Setup A or B, Guardian Halo alerts and notifications show up right on the car screen, so you don't need to pick up your phone.

  • Live video on your phone. Live video stays in the Guardian Halo app on your phone; it doesn't appear on the car screen.

  • Safety first. Keep your eyes on the road; set things up and check the live video only once you're safely parked.

Before you start

Your phone can join only one Wi-Fi network at a time

What this means

If your car uses Wi-Fi for CarPlay / Android Auto, your phone may have to choose between the car and Guardian Halo+.

The good news

There are two ways to use both at once: plug in a USB cable, or use your car's own Wi-Fi hotspot.

Guardian Halo+ Can't connect Wireless link Your phone CarPlay Android Auto Car screen
Wireless, no car hotspot: the phone has to chooseWireless CarPlay / Android Auto holds the phone's Wi-Fi, so the Guardian Halo app can't reach the camera at the same time.

Setup A · Plug in with a USB cable Works together

Move CarPlay / Android Auto to a USB cable and your phone's Wi-Fi is free for Guardian Halo+, so you can use both at once.

Guardian Halo+ Wi-Fi USB cable Your phone CarPlay Android Auto Car screen
Setup A · USB cable: use both at onceCarPlay / Android Auto runs over the cable, and the phone's Wi-Fi stays on Guardian Halo+.

How to set it up

  1. Connect your phone to Guardian Halo+ over Wi-Fi, as usual.
  2. Plug your phone into the car with a USB cable that carries data (a charge-only cable won't do).
  3. Start CarPlay / Android Auto on the car screen.

Then you can

  • Watch live video in the Guardian Halo app on your phone
  • Use CarPlay / Android Auto on the car screen
  • Get Guardian Halo alerts and notifications on the car screen
Plugged in and still nothing?

If this phone usually connects to this car wirelessly, the car may already have taken the phone's Wi-Fi before you plug in. For CarPlay, the app's advice is: Turn off Bluetooth to disconnect Wireless CarPlay before connecting to Guardian Halo Wi-Fi.

Using a wireless adapter? To your phone, that's still a wireless connection. Unplug the adapter and plug the cable straight into the car.

Not your setup? Back to the three setups Something not working? Troubleshooting

Setup B · Use your car's Wi-Fi hotspot Works together

How it works

Enter your car hotspot's name and password under Wi-Fi AP IVI in the Guardian Halo app, and Guardian Halo+ joins your car's Wi-Fi. Your phone is on the same hotspot, so it can see the camera and CarPlay / Android Auto stays connected.

Guardian Halo+ Wi-Fi Wi-Fi Your phone CarPlay Android Auto Car hotspot
Setup B · Car hotspot: one network for allYour phone and Guardian Halo+ both join your car's Wi-Fi hotspot, so they can talk to each other and CarPlay / Android Auto stays connected.

Then you can

  • Watch live video in the Guardian Halo app on your phone
  • Use CarPlay / Android Auto on the car screen
  • Get Guardian Halo alerts and notifications on the car screen

Set it up in 4 steps

Before you start
  • Connect your phone to Guardian Halo+ over Wi-Fi.
  • Have your car's Wi-Fi hotspot name (SSID) and password ready, and the hotspot switched on. Some car makers' hotspots need an active data plan.
  • Sign in to a Guardian Halo account. Without one, the CarPlay / Android Auto section is grayed out, and tapping it shows: Register an account to use CarPlay / Android Auto
  • Park the car.
  1. SSID & Password
    SSIDMyCar_WiFi
    Password••••••••
    CancelConfirm

    Enter the hotspot name and password, then tap Confirm.

  2. Start CarPlay?

    This will run CarPlay (Android Auto for Android phones). Do you want to proceed with the connection?

    ConnectCancel

    Tap Connect to start CarPlay / Android Auto.

  3. Connect Your Phone

    Please connect your phone to CarPlay (Android Auto). You will be taken to your phone’s Settings to finish.

    Open Phone SettingsCancel

    Tap Open Phone Settings and finish connecting your phone to the car.

  4. CarPlay / Android Auto
    Wi-Fi AP IVI
    SSID & PasswordEnter your car's Wi-Fi hotspot SSID & password
    Connection StatusConnected

    Done: Connection Status shows Connected.

  1. In the Settings tab, under CarPlay / Android Auto, turn on Wi-Fi AP IVI. Enter your car's Wi-Fi hotspot name (SSID) and Password, exactly as the car shows them, then tap Confirm.
  2. Start CarPlay? appears. Tap Connect to start CarPlay / Android Auto.
  3. Connect Your Phone appears. Tap Open Phone Settings and finish connecting your phone to the car.
  4. Done! Connection Status shows Connected.

If a field is empty, the app says: Enter SSID and password first

If you tap Cancel on the first card, the switch turns itself back off.

If it didn't work, the app shows:
Connection StatusConnection failed. Check that AP IVI is on and the SSID and password are correct.
What to check →

Tapping Cancel on Start CarPlay? or Connect Your Phone also ends in the failure message. It only means setup didn't finish: tap the SSID & Password row, check both fields and tap Confirm to run it again.

Changed the hotspot's password in the car? Tap the SSID & Password row to update it.

Switching back to Guardian Halo's own Wi-Fi

  1. Turn off Wi-Fi AP IVI. If Connection Status said Connected, Disconnect Wi-Fi AP IVI? appears. If it showed the failure message, the section just closes: go straight to step 3.
  2. Tap Disconnect.
  3. For CarPlay, do what the app's red note says: Turn off Bluetooth to disconnect Wireless CarPlay before connecting to Guardian Halo Wi-Fi.
  4. In your phone's Wi-Fi settings, join the network whose name starts with "Guardian Halo".

Not your setup? Back to the three setups Something not working? Troubleshooting

Setup C · Wireless without a car hotspot: only one at a time Not supported

Why it happens

Wireless CarPlay / Android Auto uses your phone's Wi-Fi to talk to the car. Guardian Halo+ needs your phone's Wi-Fi too. A phone can join only one Wi-Fi network at a time, so you would have to choose.

What you can do instead
  • Car also has a USB connection for CarPlay / Android Auto? Use a cable: Setup A.
  • Car can turn on its own Wi-Fi hotspot? Setup B.

Even if you've only ever used wireless, your car may accept a cable. Check the owner's manual for a USB port that supports CarPlay / Android Auto.

Need Guardian Halo+ on this trip anyway?
  1. End wireless CarPlay. The app's advice: Turn off Bluetooth to disconnect Wireless CarPlay before connecting to Guardian Halo Wi-Fi.
  2. In your phone's Wi-Fi settings, join the network whose name starts with "Guardian Halo".
  3. Open the app.

Turning Bluetooth off also ends hands-free calls and Bluetooth audio through the car, and the car screen loses CarPlay until you switch back.

Not your setup? Back to the three setups

Your RAV4

Guardian Halo+ fits these model years of the US Toyota RAV4 today, and we keep testing it on RAV4s.

  • 2019 · 5th gen
  • 2020–2022 · 5th gen
  • 2023–2025 · 5th gen
  • 2026 · 6th gen
  • 2027 · 6th gen

If something's not working

My phone won't join Guardian Halo Wi-Fi

Wireless CarPlay or Android Auto is probably holding your phone's Wi-Fi. End it, then join the network whose name starts with "Guardian Halo" again. For CarPlay, the app's advice is: Turn off Bluetooth to disconnect Wireless CarPlay before connecting to Guardian Halo Wi-Fi.

Is Wi-Fi AP IVI on? Then the camera may be on your car's hotspot instead of its own Wi-Fi. See Switching back to Guardian Halo's own Wi-Fi.

Guardian Halo Wi-Fi drops every time I get in the car

Your phone reconnects to wireless CarPlay or Android Auto by itself and takes the Wi-Fi. Use a cable if your car has one (Setup A). With CarPlay, you can also turn off Bluetooth before you join Guardian Halo Wi-Fi.

I use a plug-in adapter that makes CarPlay or Android Auto wireless

To your phone that's still wireless, so the adapter takes the Wi-Fi. Unplug it and plug the cable straight into the car.

My phone says Guardian Halo Wi-Fi has no internet

That's expected: the camera's Wi-Fi stays inside the car and has no internet. Stay connected to it.

The CarPlay / Android Auto section is grayed out, with a lock next to its name

That section needs a Guardian Halo account: sign in, then come back. The ⓘ help still opens without one. Tapping anything else in the section shows: Register an account to use CarPlay / Android Auto

Connection Status shows the red "Connection failed…" message

Check in this order. Is the car's hotspot switched on? (Some need an active data plan.) Is the SSID exactly right, capitals and spaces included? Is the password right? Tap the eye icon to see what you typed. Is the hotspot full? Car hotspots allow only a few devices at once. Then tap the SSID & Password row, check both fields and tap Confirm.

Still failing? Use a cable if your car has one, or use one at a time, and tell us which car it is.

Connection Status says Connected, but the app shows no live picture

Then Wi-Fi AP IVI doesn't work in this car yet, at least not with this phone. Switch back to Guardian Halo's own Wi-Fi first (see Switching back), then use a cable or one at a time. Please tell us which car it is: it helps us decide which cars to test next.

I turned on Wi-Fi AP IVI and it switched itself back off

The hotspot details weren't confirmed. Turn it on again, fill in both fields and tap Confirm.

Questions

Do Guardian Halo alerts show up on the car screen?

Yes. With Setup A or B, Guardian Halo alerts and notifications show up on CarPlay / Android Auto. The live video stays in the app on your phone.

Can I watch the back seat on my car's screen?

No. The live picture stays in the Guardian Halo app on your phone.

Why does the app tell me to turn off Bluetooth?

Wireless CarPlay uses Bluetooth to find your car, then moves your phone onto the car's Wi-Fi, which holds the phone's only Wi-Fi connection. With Bluetooth off, the phone stops reconnecting to the car on its own and can join Guardian Halo Wi-Fi instead. It's a common reason the camera's Wi-Fi won't connect, which is why the app shows it in red. Turning Bluetooth off also ends hands-free calls through the car.

Do I need an account?

For Wi-Fi AP IVI, yes: without an account, the CarPlay / Android Auto section is locked. Live video and alerts don't need an account.

Will this work in my car?

Guardian Halo+ fits the Toyota RAV4 today (2019–2025 and 2026–2027). Which setup you use depends on that car's screen. The quickest check: plug your phone in with a data cable and see whether CarPlay or Android Auto starts. See Your RAV4, or write to us with the model year.

Still stuck?

Email us with your car's model and year, your phone model and system version, which setup you tried, and the exact message the app shows. Please don't send your hotspot password.

Email support